Description
Two pack epoxy primer anticorrosion, with very good adhesion to steel and aluminum surfaces.
Basic functions of this primer is anticorrosion protection, increase adhesion and interlayer. Primer can be used as a grounding, filling or finishing primer. It can be used below and above waterline.
Product description
- 2-component epoxy anti-corrosive primer.
- Recommended for priming steel and aluminum.
- Excellent substrate protection against corrosion.
- Provides very good adhesion.
- Good flow gives a perfect finish.
- Easy to mix and apply.
- Caution: does not drip from vertical surfaces.
- Cans contain components and room for mixing them.
- First layer: Raw surface, epoxy or polyester filler, epoxy primers
- Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
- Does not require sanding between coats while maintaining the suggested time interval.
PRODUCT INFORMATION
SURFACE TYPE – steel, aluminum
COLOR – red
GLOSS – mat
VOLUME SOLIDS – 70%
DENSITY – 1,4kg/l
VOC – 374,8g/l (+5%), 513,8g/l (+40%)
MIXING RATIO – 4:1 by volume (ml), 100:15 by weight (g)
THEORETICAL COVERAGE – 11÷12m²/l for thickness 90µm (WFT) / 60µm (DFT)
METHODE OF APPLICATION – Brush, roll, airless spray gun, pneumatic spray gun
Reviews
There are no reviews yet.