Description
A HIGH SOLID type two pack epoxy primer which does not include solvents.
Primer designed for fixing laminate damages that occurred due to osmosis, it can be used as a protection against osmosis and destructive effect of water on laminate. HS primer creates hard and resistance coat. Can be also used as a anticorrosion protection on steel and aluminum surface below and above waterline.
Product description
- 2-component high build epoxy primer.
- Does not contain laminate-penetrating solvents.
- Recommended for protecting yachts and boats below the waterline.
- Repairs osmotic bubbles formed in the laminate.
- Can apply up to 150 microns in one coat.
- Provides anti-osmotic protection in two layers (300 um).
- Good flow gives a perfect finish.
- Easy to mix and apply.
- Caution: does not drip from vertical surfaces.
- Cans contain components and room for mixing them.
- First layer: Raw surface, epoxy or polyester filler, epoxy primers, paint cleaned prior.
- Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
- Does not require sanding between coats while maintaining the suggested time interval.
PRODUCT INFORMATION
SURFACE TYPE – Laminate, optionally steel and aluminum
COLOR – grey
GLOSS – gloss
VOLUME SOLIDS – 100%
DENSITY – 1,3kg/l
VOC – Not applicable
MIXING RATIO – 3:2 by volume (ml), 100:48 by weight (g)
THEORETICAL COVERAGE – 6÷7m²/l for thickness 150µm (WFT) / 150µm (DFT)
METHODE OF APPLICATION – Brush, roll, airless spray gun, pneumatic spray gun
Reviews
There are no reviews yet.